Knowledgebase: Audio Analyzers
How do I upload the memory of my PAA3 to my computer?
Posted by Rick Shao on 13 November 2015 02:51 AM
  1. Install the provided PAA3 software.
  2. Connect the PAA3 to the computer using the provided USB cable. Make sure you have the DC power adapter attached.
  3. Turn the PAA3 on and start the RTA function (SPL mode).
  4. Open the PAA3 software and select Online. This is located under the File pull-down menu.
  5. Go to File > Save to save your measurements.
  6. After you open a saved file, you can then click on the memory slot number and the RTA function will display the saved measurement data.
  7. In addition, to save the measurements taken by your PAA3 you must shut the unit down properly. This is done by pushing and holding the ON/OFF button for 2 seconds, or by simply going to the on-screen Power option of the PAA3 and selecting OFF.
(1 vote(s))
Not helpful

Comments (0)
Post a new comment
Full Name:
Help Desk by Phonic